Follow this easy tutorial to make your own wonky quilt block. ANY SIZE!
*(this post contains affiliate links, I appreciate your support when shopping through these links)
Wonky Quilt Block Step 1
Cut the center square for your block, my center square is 7.5″ by 7.5″. I am aiming to have a 10.5″ by 10.5″ wonky quilt block when I am finished.
Then add strips along all four sides that are a little more than half the width of your center block. I made my strips 4″ and then sewed them on in this order.
Attach the first strip to the top of the center square (Use 1/4″ seam allowance for all of your seams).
Step 2
I pressed each seam open, but if you prefer to press to the side you are more then welcome to do so!
Attach the second strip along the left side.
Step 3
Attach the third strip along the bottom.
Step 4
Attach the fourth strip along the right side.
Step 5
It’s time to make this quilt block WONKY!
So grab your ruler, place it on top of your block. Angle it how you want it. For myself each corner was twisted by about 1.25″ & 2.25″.
You can find the ruler I am using HERE if you want the same one.
Use some painters tape and mark this on your quilt block ruler so each block can be lined up the same as the last. This way all your blocks can be cut the same.
Step 6
Cut the excess fabric away.
Step 7
To make a block in the opposite direction just flip your ruler over and line up the tape with the center square.
Step 8
Now enjoy making allllll the wonky quilt blocks you want 🙂
The Fabric used in this tutorial is a line called “Brush with Nature” By Michael Miller Fabrics
You may also enjoy learning how to make a heart block following my valentines table runner tutorial.
Or if you are new to sewing check out my youtube channel where I teach beginner sewing tutorials.
To share this tutorial with others please help by sharing the below pin:
