After a wonderful vacation collecting enamel pins with my son we returned needing a way to display them. So I decided to sew this simple DIY enamel pin banner.
This is a great beginner sewing project that would make a perfect gift for the collector in your life OR you could even use it for an earing display banner!
*This post contains affiliate links, As an Amazon Influencer, I earn from qualifying purchases. If you shop through them I will make a small commission which allows me to continue to make these free tutorials for you. I appreciate your support.
Pin Banner Sewing Tutorial:
You Will Need:
- Quilters Cotton (Fat Quarters work for this project).
- Fusible Fleece (Pellon 987F low loft).
- Banner Rod (no shorter then 12.5″ no longer then 15″) OR a Wooden Dowel (can be found at a local hardware store) that you can cut down to size.
- 3mm Cotton Rope or Ribbon.
- All-Purpose sewing thread.
- I do recommend using a Sewing Stiletto to keep your fingers clear from the sewing needle.
- Regular sewing supplies.
Cut List:
- 2 Main Pieces & Fusible Fleece: 21″ by 14.5″
- Loop: 13.5″ by 4″
Special Measurements to Know:
- To create the point on the bottom of the banner Measure 5″ along the edge and cut from there to the center bottom of the fabric.
Watch the Video Tutorial HERE:
Follow this pin banner sewing tutorial HERE to put this project together. I try my best to not waste your time, but teach you all you need to know.
For another fun beginners sewing tutorial check out this reading pillow sewing tutorial that would also make a great kids gift. And Happy Sewing!
